1. Uneven winding is caused by the front processing machine's and the uncoiler's center lines not being on the same line.
Treatment strategy: If the uncoiler's winding is uneven, start by ensuring that its center line and the front machine's line are identical. It must be changed right away if it is inconsistent.
2. Uneven winding is caused by the uncoiler's stopper limit device's unreliability in limiting current.
Treatment method: To effectively limit the winding material, adjust the stopper limit device (typically the position of the stopper A-type iron).
3. Uneven rewinding occurs when the material head is not correctly set, causing it to begin to rewind.
Treatment strategy: To guarantee that the material head is coiled properly, it is important to make sure that the decoiler is manually wound in five to six rounds at the beginning.
4. The winding material has variable thickness, with one side being thicker than the other and varying winding speeds.
1. Rewinding waste can be treated by adjusting the rewinding speed to guarantee that the rewinding is tightened. Typically, rewinding flatness is not very high.
2. Installing a tensioning device is necessary if the winding is complete. The unequal thickness of the material is also collected neatly since the tensioner is utilized to keep the uncoiler under constant tension.
The four previously mentioned points are mostly the causes and remedies for the unequal winding of the uncoiler. Naturally, you can also get in touch with FANTY Machinery Team directly fanty..........com, and we'll assist you in finding a solution right away.